ABB FDNA-01, Руководство пользователя

Страница: 48 / 168

48 Start-up
FDNA-01 configuration parameters – group C (group 3)
Note: The actual parameter group number depends on the drive
type. Group C (group 3) corresponds to:
•
parameter group 54 in ACS355
•
parameter group 52 in ACSM1, ACS850 and ACQ810
•
parameter group 52 in ACS880 if the adapter is installed as
fieldbus adapter A or group 55 if the adapter is installed as
fieldbus adapter B.
No.
1)
Name/Value Description Default
01 DATA IN 1
(drive to master) In input assembly instances that include drive
parameters, this parameter specifies which
parameter’s value is placed in location DATA IN
1 value sent by the drive to the DeviceNet
network. Content is defined by a decimal
number in the range of 0 to 9999 as follows: 0
ACS355:
FBA DATA IN 1
ACSM1:
FBA DATA IN1
ACS850/ACQ810/
ACS880:
FBA data in1
Note: The FDNA-01 configuration parameters
are 16-bit parameters. If the mapped parameter
is a 32-bit parameter, it automatically reserves
two consecutive parameters. For example,
mapping a 32-bit parameter to parameter no. 1
also reserves parameter no. 2.
0 Not used
101…9999 Parameter index with format xxyy , where xx is
the parameter group number (1…99) and yy is
the parameter number index within that group
(01…99).
02 …
10
DATA IN 2 …
DATA IN 10
See parameter DATA IN 1 . 0
1)
The number of parameters in this group may vary by drive type and drive firmware.
0 Not used
1…99 Virtual address area of drive control.
Not used with the FDNA-01 module.
101…
9999 Parameter area of the drive