AAton Cantar Mini, Руководство пользователя

Страница: 76 / 82

•
Last phase correlation is displayed in Test/Record/Ppr Menus.
•
Dante option icon in Stop Menu
•
In play position, output configurations using Mix Left and Mix right stay valid.
(Recorded Mixdown down tracks are monitored on the corresponding output).
•
Bug fix on
Lock up in Solo mode
Level display jittering for potentiometers and sliders
Error message starting on record immediately after startup
Page breaks in the pdf report
version 1.94 (March 23, 2015)
•
User assignation is now available for rotating potentiometers.
Assignation is managed in the same way as the top panel sliders or the cantarem.
Long press on [Shift+Solo pot] to open the assignation dialog box.
•
Pre fade and Post fade monitoring are available in play (press [Shift+F2] to toggle between
the two modes)
•
A full duplex mode was added for talk back (during talkback,
current headset monitoring stay active)
•
An external low voltage alarm can be setup into TECHNICAL SETTINGS (11V - 15V)
When alarm pops up, press ESC to ignore the message ; press OK to disable external
input power and switch to internal battery (if there is a battery)
To enable external power, just unplug or switch off the ext. power source a few seconds.
•
CSV file format added to audio reports (PDF and ALE).
•
Enhanced report tools (in audio browser page : take type filters, and target can be specified)
•
In copy/backup menu, reports can be managed like audio takes
•
MS and mixdown tracks are automatically labelled into the PDF report track name field.
•
Multiple edit is available to modify the scene number (like notes, track names …).
•
Mixdowm tracks vumeters can be shifted to the right of the screen
This function is useful for a friendly interface when Mixdown tracks are located on Tracks
1&2. (see. TECHNICAL SETTINGS / Vum. mdxn shifted for setup)
•
Delay and Phantom power indicator added to the vumeter background.
•
Disarmed track label color over vumeter changed to grey .
•
The external Jam OK message is hidden in record position.
•
User bits are grabbed automatically from incoming LTC
(see AUDIO & TIMECODE PARAMETERS / Timecode Ubits for setup).
•
When the last take is deleted, monophonic files are moved to the audio trash
and on USB,SD1,SD2 the same take is definitively erased.
•
Arm/Disarm track from IN GRID screen (short press [Shift+solo track].
•
Erase in grid configuration (no more M1 M2 by default into the grid).
•
Monophonic audio file recorded on Cantar X1/X2 can be merged into Cantar X3 day folder
(Project name needs to be the same on both equipments).
•
In record position : direct access to Clap detection [F4] and Marker [F6].
•
Erase project funtion on SSD added in SESSION page.
Please note, all audio data into the project will be erased from SSD without possible
recovery.
•
Contextual help [triple shift] added in PLAY/TEST/STOP/AUDIO BROWSER/IN GRID...
Have a look, you may find unknown shortcuts and hidden functions.
•
Bug fix on
Shifted configuration in multiple outmap dialog box
In multiple field editing, the original field content indicator was wiped during navigation
Scene modification lost in PPR position if F5 short cut pressed while modifying from edit
fields
On line out level when they are driven by Cantar slider 1 to 8
In timecode record run mode, LTC out Timecode was running when Cantar was not
recording
Tape ref management for AVID if it was modified by the user
System time not updated into technical settings
Cantar X3
76