AAton Cantar Mini, Руководство пользователя

Страница: 46 / 82

recorded Take has been closed at 01:34:15, the next start-TC proposed will be 02:00:00.
The Cantar Record-Run mode lets you use the pre-record buffer without creating TC overlaps.
For example, if the preceding Take ends at 01:45:00, and the pre-record buffer is set at
thirteen seconds, the next audio file will start at 01:45:02.
3.
Internal clock, AutoSlate on clapsticks
If the same TC is not running in Cantar and cameras, the only way to sync pictures and audio is
to use clapsticks. Forget digi-slates, they have too many drawbacks. The Cantar AutoSlate
sample-accurate clapstick detection function puts a timecode crown over the simplest piece of
wood.
III.External Source
An externally-slaved Cantar stamps the audio files with the same TC as the one running in the
video camera. This requires a link from the camera to Cantar.
Set 'TC Source' to 'Ext. Clock' in the Audio & Timecode Menu.
The 'E' Timecode icon will blink in the Timecode area, meaning that Cantar is waiting to be
slaved to an external LTC source, e.g. a video camera.
Cantar is usually in the Record position before the camera, so it monitors the LEMO-5 for
incoming LTC and grabs it when coherent TC is received. That is why the Timecode icon keeps
blinking orange indicating a Timecode Jam, until the camera is up to speed.
Before closing the audio file, Cantar stamps the TC by using the latest valid Timecode so as to
eliminate spurious transmission errors and false camera starts. If there is no external timecode
signal, an 'LTC Not Detected' warning appears.
Nevertheless, the external TC is grabbed if it is received before the Take's end.
Cantar X3
46