AAton Cantar Mini, Руководство пользователя

Страница: 14 / 82

General Mechanical description
The Cantar can be roughly divided into several main parts :
•
The Linear Actioner panel : 10 linear faders, each having a corresponding solo Button.
On the back side of the panel are located the TA-3 corresponding to the analog inputs :
4 Mics and 2 Line inputs.
The analog outputs and HiRose connectors can also be found at the rear.
•
The button panel : enabling to control the User interface throught :
▪
Function buttons (F1 to F4)
▪
Shift and Control modification buttons.
▪
Directional buttons : Left and Right, and below the Plus(+) and Minus(-) buttons
which are used to control the Headphone configurations in normal mode
(PPR/REC) or oftenly as Up and Down buttons.
▪
Ok and Escape buttons.
▪
Power On/Off at the back of the panel.
Below that panel, on the front side of the Cantar are located the jacks : a 6.35 mm
Headphone jack and a 3,5mm jack for Headphone/Slate.
On the left of the Front panel is the embedded Talk/ Slate mic.
•
The Display panel : a large orientable LCD screen, foldable on the Linear actuator panel,
the screen may be orientable according to the work condition (shoulder, cart …).
•
The Selector : on the right side of the machine is the Main Selector.
It has 12 positions, to each position corresponds a Menu on the screen and a
functionality. It has a Jog wheel in its center.
The 12 positions are :
◦
Record (12 o’clock position)
◦
Pre-Record (11 o’clock position)
◦
Test (10 o’clock position)
◦
Stop (9 o’clock position)
◦
Play (8 o’clock position)
◦
Audio File Browser (7 o’clock position)
◦
Outmaps (6 o’clock position)
◦
InGrid (5 o’clock position)
◦
Audio & Timecode (4 o’clock position)
◦
Technical (3 o’clock position)
◦
Session (2 o’clock position)
◦
Backup (1 o’clock position)
Cantar X3
14