AAton Cantar Mini, Руководство пользователя

Страница: 57 / 82

•
Tape ref. hexa: The first 4 characters NNNN set 0000NNNN User-Bits (numeric value are
recommended).
•
Date BCD: Audio date automatically sets up the User-Bits field with iso format.
(e.g. Audio date 25/02/2016 will be inserted as 25021600 User-Bits).
6.
Timecode Fudged
The audio-file time stamps correct the TC flaw of some HD cameras.
WARNING : TC will be artificially shifted of 60 ms.
To prevent trouble this choice is not saved at power off.
7.
Operator TC
The Operator entered TC becomes the next recording session reference.
'OTC' is displayed as timecode flag.
8.
Record-Run TC
Record-Run is activated for the full session until another timecode Source is selected; in that case
the clock goes back to its default Free-Run mode.
'RTC' is displayed as timecode flag.
IV.Clap Detection
Selects the AutoSlate detection channel.
V. Mixer Fader Max Level
Mixer's faders top position gain.
VI.Phantom Mic Gain
Let the user decide whether to add an analog gain (+6dB) when the Phantom Mic Power is ON.
VII.Polyphonic Mode
Choose between Original (Unused or disarmed tracks between used ones are embedded in
the Poly file as emtpy, preserving tracks index) or Compact ( Unused or disarmed tracks
between used ones are not embedded (lighter files). The original track in dex may be lost in
non linear editing software).
VIII. Tone & Beep
1.
Tone Level
1kHz tone level.
2.
Beep Level
Headphone beep level.
3.
Record Beep
Single beep on 'start', double beep on 'stop'.
Double beep is useful to warn you when the video camera stops, while recording in Remote Roll
by LTC.
4.
Beep Routing
Let the user decide whether to route the beeps to the outputs or not. (Line outputs, AES outputs).
Headphone is always enabled and cannot be changed.
IX. Disarmed Tracks
Audio Stream of disarmed Tracks : OFF = Tracks muted ; ON = Tracks still not recorded and not
sent to mixdown but not muted (Vumeters, Outmaps, Solo, Postfade)
X. Remote Rec
Enable or disable Remote Rec. When enabled, Record may be started and stopped while the
Main Selector is in the Ppr Position using the Option socket. 0 V = stop ; 5 V = start.
Cantar X3
57