AAton Cantar Mini, Руководство пользователя

Страница: 35 / 82

2.
Play Mute
When the Cantar is in the Play position, the output may be Muted using the Play Mute option.
Using the Left and Right buttons or the Jog wheel, move the light blue selection box to the third
item of the wanted row and press the OK button to modify the value.
If the Play symbol is de-activated (emptied triangle) the output is muted in Play.
NB: In that case, while in Play position, any input routed to the output will remain active.
In Pict “Lo.1”, Line outputs 1 & 3 will be muted in Play.
3.
Beep Mute
Beeps (record beeps, warning beeps) may be muted on each output.
Using the Left and Right buttons or the Jog wheel, move the light blue selection box to the fourth
item of the wanted row and press the OK button to modify the value.
If the Beep symbol is crossed, beeps won't be routed to the output
In Pict “Lo.1”, Beeps are enabled for outputs 2 & 3 only.
4.
Current Configuration
You can change the Outmap applied to an Output by selecting its row and then pressing the
Plus(+) or Minus(-) button while holding the Control button pressed. Letter, name and Outmap
settings are updated.
A special Outmap is placed before the 'a' outmap: the Muted outmap where no input is routed.
It is also possible to select an Outmap using the Left and Right buttons or the Jog wheel, in order
to move the light blue selection box to the fifth item of the wanted row and press the OK button
to display the Outmap selection window.
Using the Plus(+) and Minus(-) buttons, select the wanted Outmap and apply it by pressing the
Ok button. It is also possible to edit the currently selected Outmap by pressing the F4 button.
5.
Edit Outmap
Press the F4 button to open the Configuration Edit window.
WARNING : Keep in mind that the configuration you are modifying can be applied to multiple
outputs. Even more, as the Outmaps are shared between AES and Line Outputs it can also
modify an AES Output.
In the previous picture, Outmap 'a' is applied to Lineout 1 but also to AES-Out 1 to 4 as stated
by the warning text at the left of the window.
You can change to the previous or next Outmap by turning the Left Crown.
i.
Name
Each Outmaps can be named (max: 12 characters).
Press the Shift+OK buttons to modify it.
ii.
Inputs
Any Input can be sent to Line Output. Scroll through the grid with the direction
buttons or the Jog wheel and press the OK button to enable or disable an input.
Cantar X3
35