AAton Cantar Mini, Руководство пользователя

Страница: 39 / 82

1.
Recorded Mixdown
In this mode, are sent to headphone, Tracks corresponding to Mixdown-Left and Mixdown-Right.
Tracks will be routed Mono (to both left and right ears), Vumeters from other Tracks than
Mixdown are darken.
This mode is symbolized on the Headphone
Outmap grid (F2 button press) by Xl and Xr
inputs being active, at Center.
2.
Tracks-Mono
In this mode, are sent to headphone, all Tracks that are not Mixdown Tracks.
Tracks will be routed Mono (to both left and right ears).
This mode is symbolized on the Headphone
Outmap grid (F2 button press) by playback
Tracks being active, at Center.
Tracks are labelled according to the
chosen monitoring mode: “P” to
emphasize the PostFader property or “T”
for PreFader mode.
3.
User Outmaps
In this mode, all Tracks routed into the current User defined Outmap are sent to the headphones.
Tracks will be routed according to the Outmap. Tracks are played according to the Monitoring
Mode selected (Pre or Post Fader).
NB : • On top of the Vumeters is displayed Track's attenuation.
• If no actuator is assigned to a played Track, its attenuation can still be changed by :
- Solo-ing the Track (Solo of any Track, then press the C Minus(-) or Plus(+)
button) and then while holding the Shift button press, rotating the Jog wheel.
Or
- Displaying the InGrid panel (press the F1 button), selecting the desired track and
then while holding the Shift button pressed, rotating the Jog wheel.
This mode is symbolized on the Headphone Outmap grid by playback Tracks being active, at
the side designated in the Outmap. Tracks are labelled according to the chosen monitoring
mode: “P” to emphasize the PostFader property or “T” for PreFader mode.
NB : Only Tracks can be activated, other inputs than tracks are marked inactive, except for
Mixdown: if a Mixdown type input is routed on the Outmap, then the Cantar will automatically
play the first track corresponding to the routed Mix input.
Cantar X3
39