Page
28
of
44
3DGence Material Management System | version 1 | 03.2022
MMS INFO SECTION
Machine type
- device model.
Serial number
- device serial number.
Firmware version
–
the software version of the device.
Total run time
–
total number of operating hours of the device.
MMS CONFIGURATION INFO SECTION
Chamber type
–
the type of chamber installed in the device.
Firmware version
–
the software version of the chamber.
Status
–
current status of the chamber.
1.2.2
Time/date settings screen
Fig. 31 Screen related to setting the time (set time)
The top of the screen shows the current time and the current date.
Time zone
–
allows you to set the time zone.
Adjust automatically
–
The default setting "on" allows the date and time to be set automatically on the device. The only
requirement is that the device is connected to the internet. The option can be deactivated by moving the slider to the "off"
position and then the "adjust manually" option becomes active.
Adjust manually
–
allows you to set the time and date manually.
