Page
14
of
44
3DGence Material Management System | version 1 | 03.2022
Fig. 8 Proposed position of the WLAN adapter on the device
5.3.
Network configuration
On the display of the device after selecting:
network settings button in the "network type" record, you can select the
type of connection. The possible states are:
•
disabled - disabled network options,
•
wired - connected to the LAN through a cable with an RJ45 plug,
•
Wi-Fi - wireless connection using a WLAN adapter.
When a WLAN adapter is connected and a connection via Wi-Fi is selected in the "network type" record, the "Wi-Fi" record
below becomes active and takes you to the list of available networks. Once a network is selected, the MMS attempts to connect
to it and an on-screen keyboard appears with the option to enter a password if required. Connection to the network is indicated
by the "connected" status at the bottom of the screen.
If connection via "wired" cable is selected in the "network type" record, remove the WLAN adapter from the MMS and plug
the LAN cable into the LAN/ WLAN adapter socket on the device. Connection to the network is indicated by the "connected"
status at the bottom of the screen.
