Page
39
of
44
3DGence Material Management System | version 1 | 03.2022
To start your own process, enter the process wizard screen and then select CUSTOM DRYING. When CUSTOM DRYING is
selected, a set of parameters will appear on the screen for you to define. When the START button is pressed, the cycle will start
automatically. At the end of the set cycle, the chamber will automatically switch to material storage mode.
NOTE
: In the user-defined process mode, all functions for tracking material status (including the SMM TAG factor) are disabled.
Fig. 48 Screens demonstrating the activation of the user-defined process
To cancel the user-defined process, press on the chamber area during the process. After pressing the chamber area, confirm
your intention to cancel the process by pressing the ABORT button. To reset the chamber status to empty, press the chamber
area.
Fig. 49 Screens demonstrating the process of cancelling the user-defined process
