Page
34
of
44
3DGence Material Management System | version 1 | 03.2022
•
DRYING
–
a button which allows to add material to the device chamber and subsequently to start the material
preparation cycle.
Fig. 38 Screen for loading material into the MMS device
Regardless of the option selected on the loading screen, the device will first verify the availability of the chambers in terms of
temperature and space and then indicate the best fit to the user. If the device does not find suitable space for the material and
the selected programme, it will inform the user when space for the material becomes available. When the material to be loaded
has a lower process temperature than the one currently prevailing in the chamber, the device will inform the user to wait until
the chamber cools down below the process temperature for the preparation of the material.
Fig. 39 Material loading screen. The device indicates the place where the selected material is to be inserted
Once the material has been loaded into the indicated place and the chamber door is closed, the device will automatically start
the selected process. The screen below shows the 3DGence Material Management System device at work, presenting:
•
Empty chamber 1.
•
Process of storing materials in the chamber 2.
•
Process of material preparation in the chamber 3.
