Page
25
of
44
3DGence Material Management System | version 1 | 03.2022
Fig. 25 Network settings screen
Network type
–
use the arrows to select the type of MMS connection. The possible states are:
•
“disabled”
- disabled network options,
•
“wired”
- connected to the LAN through a cable with an RJ45 plug,
•
“Wi
-
Fi”
- wireless connection using a WLAN adapter.
Wi-Fi
networks
–
transfers to the list of available networks.
Network details
–
transfers to the screen related to network connection details.
3DGence CLOUD
–
transfers you to the screen related to the connection with 3DGence CLOUD.
Connection status
–
informs about the status of the connection.
Fig. 26 Screen with available Wi-Fi networks
Scan
–
selecting this button allows you to search for available networks.
To enable connection to one of the available Wi-Fi networks, select it. The device will then attempt to connect to the network
and an on-screen keyboard will appear with the option to enter a password if required. Connection to the network is indicated
by the "connected" status at the bottom of the screen.
