Page
26
of
44
3DGence Material Management System | version 1 | 03.2022
Fig. 27 Network details screen.
Dynamic IP
–
choice of static or dynamic IP address.
ID address
–
network address of the device.
Gateway address
–
IP address of the default gateway.
Netmask
–
sub-net mask.
MAC
–
physical address of the device.
Fig. 28 3DGence CLOUD screen
Allow cloud connection
–
the default setting of "on" allows the MMS to connect to the 3DGence CLOUD platform. This option
can be disabled by moving the slider to the "off" position.
Connection state
–
status indicating whether the device has been connected to the 3DGence CLOUD platform.
Printer serial number
–
MMS serial number to be entered when adding the device to the 3DGence CLOUD web platform.
CLOUD PIN
–
the code to be entered when adding the device to the 3DGence CLOUD web platform.
Allow automatic updates
–
the default setting of "on" allows automatic updates of the device software. This option can be
disabled by moving the slider to the "off" position. The manufacturer recommends enabling automatic software updates.
Allow 3DGence to download diagnostic data
–
the default setting of "off" allows the manufacturer to automatically download
diagnostic data from the device. Data is collected in case of maintenance and/or after-sales support needs.
