Page
12
of
44
3DGence Material Management System | version 1 | 03.2022
1.7.
Specification of electrical connection
The electrical characteristics of the 3DGence Material Management System device are summarised below. The connection
should be adjusted to the specified values.
Voltage:
230V AC (210-250V AC).
Frequency:
50-60 Hz.
Maximum current consumption by the device in the following variants:
•
- 1 chamber: 8A
•
- 3 chambers: 16A
•
- 4 chambers: 24A
•
- 6 chambers: 32A
In European conditions
The 1- and 3-chamber versions are supplied with a 1-phase 16A plug in the CEE 7/7 standard. The 3-chamber extension module
is supplied with a 16A 1-phase plug in CEE 7/7 standard and a 32A 3-phase CEE17 adapter for 3x 16A 1-phase sockets in CEE 7/7
standard.
In US conditions
All variants of the devices are supplied with a NEMA L6 20A plug. The 4 and 6 chamber versions (base expansion
module) require two power supply lines, each in NEMA L6 20A standard.
1.8.
Power requirement
The power requirement mainly depends on the type of process carried out in the device. Different temperatures are
maintained in the device chamber for each process. A summary of the power requirements for the different materials is shown
in Table 2.
Table 2 Power requirement characteristics for different temperatures (example for 1 device chamber)
Variant
Current consumption [A]
Power consumption [W]
MIN
MAX
MIN
MAX
Heating off
0.36
0.36
65
65
50
°
C
0.36
5.21
65
1245
60
°
C
80
°
C
120
°
C
200
°
C
2.
CONTENTS OF THE SET
The 3DGence Material Management System comes with a set of necessary accessories. The set includes:
•
drawers for storing materials in the device chamber (one for each chamber),
•
air-drying cartridges (one for each chamber),
•
3ph 32A / 3x 1ph power adapter (only for 3-chamber expansion module),
•
wireless communication module (WLAN) and RJ45 connection cable.
