Page
35
of
44
3DGence Material Management System | version 1 | 03.2022
To unload the material, select the appropriate material from the main screen by clicking on its icon on the screen. After clicking
on the material icon, the details screen for the selected item will appear. Pressing the REMOVE button will start the procedure
of unloading the material from the device chamber.
NOTE
: The status of ready-to-print material will be assigned to a spool of material that:
•
has successfully passed the preparation cycle,
•
once the process was complete, it was scanned with the SMM TAG reader on the front of the device for the status
update.
Fig. 41 Screen for unloading material from the device chamber
Fig. 40 Screen demonstrating the operating scenario
