Prestige 310 Broadband Sharing Gateway
3-8
Internet Access
Table 3-5 IP Alias Setup Menu Fields
FIELD
DESCRIPTION
EXAMPLE
IP Alias
Choose
Yes
to configure the LAN network for the Prestige.
Yes
IP Address
Enter the IP address of your Prestige in dotted decimal notation
192.168.2.1
IP Subnet Mask Your Prestige will automatically calculate the subnet mask based on
the IP address that you assign. Unless you are implementing
subnetting, use the subnet mask computed by the Prestige.
255.255.255.0
RIP Direction
Press the [SPACE BAR] to select the RIP direction.
Options are
None
,
Both
,
In Only
or
Out Only
.
None
Version
Press the [SPACE BAR] to select the RIP version.
Options are
RIP-1
,
RIP-2B
or
RIP-2M
.
RIP-1
Incoming
Protocol Filters
Enter the filter set(s) you wish to apply to the incoming traffic
between this node and the Prestige.
Outgoing
Protocol Filters
Enter the filter set(s) you wish to apply to the outgoing traffic between
this node and the Prestige.
When you have completed this menu, press [ENTER] at the prompt [Press ENTER to Confirm…] to save
your configuration, or press [ESC] at any time to cancel.
3.3 Internet
Access
Setup
You will see three different menu 4 screens depending on whether you chose
Ethernet
,
PPTP
or
PPPoE
encapsulation.
In the
Encapsulation
field in menu 4, choose:
•
Ethernet
when the WAN port is used as a regular Ethernet.
•
PPTP
or
PPPoE
if you have a dial-up connection to the Internet.
3.3.1 Ethernet Encapsulation
You must choose the
Ethernet
option when the WAN port is used as a regular Ethernet. If you choose
Ethernet
in menu 4 you will see the next screen.
