Prestige 310 Broadband Sharing Gateway
System Maintenance and Information
11-1
Chapter 11
System Maintenance and Information
This chapter leads you through SMT menus 24.8 to 24.11.
11.1 Command Interpreter Mode
The Command Interpreter (CI) is a part of the main router firmware. The CI provides much of the same
functionality as the SMT, while adding some low-level setup and diagnostic functions. The CI can be entered
from the SMT by selecting menu 24.8. Access can be either by Telnet or by a serial connection to the console
port, although some commands are only available with a serial connection. See the
support CD
or the
zyxel.com web site for more detailed information on CI commands. Enter 8 from
Menu 24 — System
Maintenance
. A list of valid commands can be found by entering “help” or “?” at the command prompt.
Type “exit” and press
[ENTER]
to return to the SMT main menu when finished.
Figure 11-1 Command Mode in Menu 24
Menu 24 - System Maintenance
1. System Status
2. System Information and Console Port Speed
3. Log and Trace
4. Diagnostic
5. Backup Configuration
6. Restore Configuration
7. Firmware Update
8. Command Interpreter Mode
9. Call Control
10. Time and Date Setting
11. Remote Management Setup
Enter Menu Selection Number:
