Prestige 310 Broadband Sharing Gateway
Call Scheduling
14-1
Chapter 14
Call Scheduling
This chapter shows you how to setup call time periods for remote nodes.
14.1 Introduction
The call scheduling feature allows the Prestige to manage a remote node and dictate when a remote node
should be called and for how long. This feature is similar to the scheduler in a video cassette recorder (you
can record programs at times that you specify). You can apply up to four schedule sets in
Menu 11.1 —
Remote Node Profile
.
14.2 Schedule Setup
From the main menu, enter 26 to access
Menu 26 — Schedule Setup
as shown next.
Figure 14-1 Schedule Setup
Lower numbered sets take precedence over higher numbered sets thereby avoiding scheduling conflicts. For
example, if sets 1, 2 ,3 and 4 in are applied in the remote node then set 1 will take precedence over set 2, 3
and 4 as the Prestige, by default, applies the lowest numbered set first. Set 2 will take precedence over set 3
and 4, and so on.
You can design up to 12 schedule sets but you can only apply up to four schedule sets for a remote node.
Menu 26 - Schedule Setup
Schedule
Set #
------
1
2
3
4
5
6
Name
------------------
______________
______________
______________
______________
______________
______________
Schedule
Set #
------
7
8
9
10
11
12
Name
------------------
______________
______________
______________
______________
______________
______________
Enter Schedule Set Number to Configure=
Edit Name=
Press ENTER to Confirm or ESC to Cancel:
