Prestige 310 Broadband Sharing Gateway
7-18
Filter Configuration
7.5.2 Remote Node Filters
Go to menu 11.5 (shown next – note that call filter sets are only present for PPPoE encapsulation) and enter
the number(s) of the filter set(s) as appropriate. You can cascade up to four filter sets by entering their
numbers separated by commas. The factory default filter set, NetBIOS_WAN, can be applied in menu 11.5
to block local NetBIOS traffic from triggering calls to the ISP (when you are using PPPoE or PPTP
encapsulation only). Enter 1 in
protocol filters
under
Output Filter Sets
when using Ethernet encapsulation,
and in the
protocol filters
field under
Call Filter Sets
when using PPPoE or PPTP encapsulation. Apply
them as shown in the following figure.
Figure 7-17 Filtering Remote Node Traffic
Menu 11.5 - Remote Node Filter
Input Filter Sets:
protocol filters= 5
device filters=
Output Filter Sets:
protocol filters= 1
device filters=
Apply
factory
default
filters
here.
