Prestige 310 Broadband Sharing Gateway
B
Appendix A
b. Select
Client
and then click
Add
.
c. Select
Microsoft
from the list of manufacturers.
d. Select
Client for Microsoft Networks
from the list of network clients and then click
OK
.
e. Restart your computer so the changes you made take effect.
Configuring TCP/IP
1.
In the
Network
window
Configuration
tab, select your network adapter's TCP/IP entry and click
Properties
.
2.
Click the
IP Address
tab.
•
If your IP address is dynamic, select
Obtain an IP address automatically
.
•
If you have a static IP address, select
Specify an IP address
and type your information into the
IP
Address
and
Subnet Mask
fields.
3.
Click the
DNS Configuration
tab.
•
If you do not know your DNS information, select
Disable DNS
.
•
If you know your DNS information, select
Enable DNS
and type the information in the fields below
(you may not need to fill them all in).
4.
Click the
Gateway
tab.
•
If you were not given a gateway IP address, remove previously installed gateways.
•
If you have a gateway IP address, type it in the
New gateway
field and click
Add
.
5.
Click
OK
to save and close the
TCP/IP Properties
window.
6.
Click
OK
to close the
Network
window. Insert the Windows CD if prompted.
7.
Turn on your Prestige and restart your computer when prompted.
Verifying TCP/IP Properties
1.
Click
Start
and then
Run
.
2.
In the
Run
window, type "winipcfg" and then click
OK
to open the
IP Configuration
window.
3.
Select your network adapter. You should see your computer's IP address, subnet mask and default
gateway.
