Prestige 310 Broadband Sharing Gateway
7-6
Filter Configuration
Table 7-1 Abbreviations Used in the Filter Rules Summary Menu
FIELD
DESCRIPTION
#
The filter rule number: 1 to 6.
A
Active: “Y” means the rule is active. “N” means the rule is inactive.
Type
The type of filter rule: “GEN” for Generic, “IP” for TCP/IP.
Filter Rules
These parameters are displayed here.
M
More.
“Y” means there are more rules to check which form a rule chain with the present rule.
An action cannot be taken until the rule chain is complete.
“N” means there are no more rules to check. You can specify an action to be taken
i.e., forward the packet, drop the packet or check the next rule. For the latter, the next
rule is independent of the rule just checked.
m
Action Matched.
“F” means to forward the packet immediately and skip checking the remaining rules.
“D” means to drop the packet.
“N“ means to check the next rule.
n
Action Not Matched.
“F” means to forward the packet immediately and skip checking the remaining rules.
“D” means to drop the packet.
“N” means to check the next rule.
The protocol dependent filter rules abbreviation are listed as follows:
Table 7-2 Rule Abbreviations Used
ABBREVIATION
DESCRIPTION
IP
Pr
Protocol
SA
Source Address
SP
Source Port number
DA
Destination Address
DP
Destination Port number
GEN
Off
Offset
Len
Length
Refer to the next section for information on configuring the filter rules.
