Prestige 310 Broadband Sharing Gateway
System Maintenance and Information
11-5
Figure 11-6 Menu 24 — System Maintenance
Then enter 10 to go to
Menu 24.10 — System Maintenance — Time and Date Setting
to update the time
and date settings of your Prestige as shown in the following screen.
Figure 11-7 Menu 24.10 System Maintenance — Time and Date Setting
Table 11-3 Time and Date Setting Fields
FIELD
DESCRIPTION
Use Time Server
when Bootup
Enter the time service protocol that your time server sends when you turn on the
Prestige. Not all time servers support all protocols, so you may have to check with
your ISP/network administrator or use trial and error to find a protocol that works.
The main differences between them are the format.
Daytime (RFC 867)
format is day/month/year/time zone of the server.
Menu 24.10 - System Maintenance - Time and Date Setting
Use Time Server when Bootup= None
Time Server IP Address= N/A
Current Time:
00 : 00 : 00
New Time (hh:mm:ss):
11 : 23 : 16
Current Date:
2000 - 01 - 01
New Date (yyyy-mm-dd):
2001 - 03 - 01
Time Zone= GMT
Daylight Saving= No
Start Date (mm-dd): 01 – 01
End Date (mm_dd): 01 – 01
Press ENTER to Confirm or ESC to Cancel:
Menu 24 - System Maintenance
1.
System Status
2.
System Information and Console Port Speed
3.
Log and Trace
4.
Diagnostic
5.
Backup Configuration
6.
Restore Configuration
7.
Upload Firmware
8.
Command Interpreter Mode
9.
Call Control
10.
Time and Date Setting
11.
Remote Management Setup
Enter Menu Selection Number:
