Prestige 310 Broadband Sharing Gateway
Hardware Installation and Initial Setup
2-5
Figure 2-3 Initial Screen
2.4.2 Entering the Password
The login screen appears after you press [
ENTER
], prompting you to enter the password, as shown next.
For your first login, enter the default password "1234"." As you type the password, the screen displays an
"X" for each character you type.
Note that if there is no activity for longer than five minutes after you log in, your Prestige will automatically
log you out and display a blank screen. If you see a blank screen, press [
ENTER
] to display the login screen
again.
Figure 2-4 Password Screen
2.5 Navigating the SMT Interface
The SMT (System Management Terminal) is the interface that you use to configure your Prestige.
Several operations that you should be familiar with before you attempt to modify the configuration are listed
next.
Copyright (c) 1994 - 2002 ZyXEL Communications Corp.
initialize ch =0, ethernet address: 00:a0:c5:27:84:52
initialize ch =1, ethernet address: 00:a0:c5:27:84:53
Press ENTER to continue...
Enter Password : XXXX
