ZyXEL Communications VSG1432-B101 - V1.10 Manual Download Page 112

Page: 112 / 408

Chapter 7 Wireless

VSG1432-B101 Series User’s Guide

112

• A wireless client is a radio connected to a user’s computer.
• An access point is a radio with a wired connection to a network, which can

connect with numerous wireless clients and let them access the network.

• A bridge is a radio that relays communications between access points and

wireless clients, extending a network’s range.

Traditionally, a wireless network operates in one of two ways.

• An “infrastructure” type of network has one or more access points and one or

more wireless clients. The wireless clients connect to the access points.

• An “ad-hoc” type of network is one in which there is no access point. Wireless

clients connect to one another in order to exchange information.

The following figure provides an example of a wireless network.

Figure 36

Example of a Wireless Network

The wireless network is the part in the blue circle. In this wireless network,
devices

and

use the access point (

) to interact with the other devices (such

as the printer) or with the Internet. Your ZyXEL Device is the AP.

Every wireless network must follow these basic guidelines.

• Every device in the same wireless network must use the same SSID.

The SSID is the name of the wireless network. It stands for Service Set

IDentifier.

Summary of Contents for VSG1432-B101 - V1.10

























































































































































































































































































































































































































Search results

Summary of Contents for VSG1432-B101 - V1.10

Reviews:

Related manuals for VSG1432-B101 - V1.10

Brands by name

Popular brands

ZyXEL Communications VSG1432-B101 - V1.10, Manual

Search results

Summary of Contents for VSG1432-B101 - V1.10

Reviews:

Related manuals for VSG1432-B101 - V1.10

Brands by name

Popular brands