ZyXEL Communications VSG1432-B101 - V1.10, Manual

Page: 59 / 408

Chapter 4 Tutorials
VSG1432-B101 Series User’s Guide
59
You need to specify a static routing rule on the ZyXEL Device to specify R as the
router in charge of forwarding traffic to N2 . In this case, the ZyXEL Device routes
traffic from A to R and then R routes the traffic to B .
This tutorial uses the following example IP settings:
To configure a static route to route traffic from N1 to N2 :
1
Log into the ZyXEL Device’s Web Configurator in advanced mode.
2
Click Advanced > Routing .
3
Click Add New Static Route Entry in the Static Route screen.
4
Configure the Static Route Setup screen using the following settings:
Table 4 IP Settings in this Tutorial
DEVICE / COMPUTER IP ADDRESS
The ZyXEL Device’s WAN 172.16.1.1
The ZyXEL Device’s LAN 192.168.1.1
A 192.168.1.34
R ’s N1 192.168.1.253
R ’s N2 192.168.10.2
B 192.168.10.33
N2
B
N1
A
R