ZyXEL Communications VSG1432-B101 - V1.10, Manual

Page: 104 / 408

Chapter 7 Wireless
VSG1432-B101 Series User’s Guide
104
Use this screen to view your ZyXEL Device’s MAC filter settings and add new MAC
filter rules. Click
Wireless > MAC Authentication . The screen appears as
shown.
Figure 30 Wireless > MAC Authentication
The following table describes the labels in this screen.
Table 16 Wireless > MAC Authentication
LABEL DESCRIPTION
SSID Select the SSID for which you want to configure MAC filter settings.
MAC Restrict
Mode
Define the filter action for the list of MAC addresses in the MAC Address
table.
Select Disable to turn off MAC filtering.
Select Deny to block access to the ZyXEL Device. MAC addresses not listed
will be allowed to access the ZyXEL Device.
Select Allow to permit access to the ZyXEL Device. MAC addresses not
listed will be denied access to the ZyXEL Device.
Add new
MAC
address Click this if you want to add a new MAC address entry to the MAC filter list
below.
Enter the MAC addresses of the wireless devices that are allowed or denied
access to the ZyXEL Device in these address fields. Enter the MAC
addresses in a valid MAC address format, that is, six hexadecimal character
pairs, for example, 12:34:56:78:9a:bc.
# This is the index number of the entry.
MAC
Address This is the MAC addresses of the wireless devices that are allowed or denied
access to the ZyXEL Device.
Modify Click the Delete icon to delete the entry.
Apply Click Apply to save your changes.
Cancel Click Cancel to exit this screen without saving.