ZyXEL Communications VSG1432-B101 - V1.10, Manual

Page: 100 / 408

Chapter 7 Wireless
VSG1432-B101 Series User’s Guide
100
Click Network Settings > Wireless to display the General screen. Select More
Secure as the security level. Then select WPA or WPA2 from the Security Mode
list.
Figure 27 Wireless > General: More Secure: WPA(2)
The following table describes the labels in this screen.
Table 13 Wireless > General: More Secure: WPA(2)
LABEL DESCRIPTION
Security Level Select More Secure to enable WPA(2)-PSK data encryption.
Security Mode Choose WPA or WPA2 from the drop-down list box.
Authentication Server
IP Address Enter the IP address of the external authentication server in dotted
decimal notation.
Port Number Enter the port number of the external authentication server. The
default port number is
1812 .
You need not change this value unless your network administrator
instructs you to do so with additional information.
Shared Secret Enter a password (up to 31 alphanumeric characters) as the key to be
shared between the external authentication server and the ZyXEL
Device.
The key must be the same on the external authentication server and
your ZyXEL Device. The key is not sent over the network.
more.../less Click more... to show more fields in this section. Click less to hide
them.
WPA Compatible This field is only available for WPA2. Select this if you want the ZyXEL
Device to support WPA and WPA2 simultaneously.