ZyXEL Communications Prestige 861H-G1, User Manual

Page: 256 / 275

Prestige 861H User’s Guide
34-6 VDSL Commands
Table 34-5 PVC List
PARAMETER DESCRIPTION
encap This field displays the method of encapsulation used by your ISP. Choices vary
depending on the operating mode of each remote node.
If the operating mode is set as a bridge, this field displays either
PPPoA or RFC
1483 .
If the operating mode is set as routing, this field displays PPPoA , RFC 1483 , ENET
ENCAP or PPPoE .
ip This field displays whether the remote node is configured as a router ( IP ) or as a
bridge ( BDG ).
34.6.4 Activate the VDSL Current Port Profile
Syntax:
vdsl profile actv
This command activates the VDSL current port profile.
It sends the current selected profile to the Prestige. It also sends system and port provisioning data
to the Prestige and then the Prestige will be informed to initiating the VDSL line.
34.6.5 Reset VDSL Profile
Syntax:
vdsl profile default
This command resets the VDSL profile to be the default settings, see Table 34-2 for more
information.
Figure 34-5 Reset VDSL Profile
34.6.6 Band Plan
Each VDSL mode operates in a different frequency band allocation, resulting in different
upstream and downstream speeds. The following table summarizes frequency ranges for each
VDSL mode supported by the Prestige.
Table 34-6 VDSL Mode and Frequency Ranges
FREQ. RANGE (Hz) VDSL
MODE
BAND PLAN
UPSTREAM_1 DOWNSTREAM_1 UPSTREAM_1 DOWNSTREAM_2
998-138-8500 0.138M ~ 3.75M 3.75M ~ 5.20M 5.20M ~ 8.50M ANSI/ETSI
Plan 998
998-138-12000 0.138M ~ 3.75M 3.75M ~ 5.20M 5.20M ~ 8.50M 8.50M ~ 12.00M
997-138-8500 0.138M ~ 3.00M 3.00M ~ 5.10M 5.10M ~ 7.05M 7.05M ~ 8.50M ETSI Plan
997
998-137-4400 0.138M ~ 3.00M 3.00M ~ 4.40M
P861H> vdsl profile default
Profile reset OK!
P861H>