ZyXEL Communications Prestige 861H-G1, User Manual

Page: 190 / 275

Prestige 861H User’s Guide
23-14 Filter Configuration
Filter Sets in menu 3.1 in order to prevent local NetBIOS messages from triggering calls to the
DNS server.
Figure 23-14 Filtering Ethernet Traffic
23.7.2 Remote Node Filters
Go to menu 11.5 (shown next) and type the number(s) of the filter set(s) as appropriate. You can
cascade up to four filter sets by typing their numbers separated by commas. The factory default
filter set, NetBIOS_WAN, is inserted in the
protocol filters field under Call Filter Sets in menu
11.5 to block local NetBIOS traffic from triggering calls to the ISP.
Figure 23-15 Filtering Remote Node Traffic
Note that call filter sets are visible when you select PPPoA or PPPoE encapsulation.
Menu 3.1 – LAN Port Filter Setup
Input Filter Sets:
protocol filters= 3
device filters=
Output Filter Sets:
protocol filters=
device filters=
Press ENTER to Confirm or ESC to Cancel:
Menu 11.5 - Remote Node Filter
Input Filter Sets:
protocol filters= 6
device filters=
Output Filter Sets:
protocol filters= 2
device filters=
Call Filter Sets:
Protocol filters=
Device filters=