ZyXEL Communications Prestige 861H-G1, User Manual

Page: 133 / 275

Prestige 861H User’s Guide
Menu 3 Ethernet Setup 17-3
Table 17-1 DHCP Ethernet Setup
FIELD DESCRIPTION EXAMPLE
Client IP Pool Starting
Address This field specifies the first of the contiguous addresses in the IP
address pool. 192.168.1.33
Size of Client IP Pool This field specifies the size or count of the IP address pool.
You can store a maximum of
four IP addresses in the client
IP pool.
4
Primary DNS Server
Secondary DNS Server Enter the IP addresses of the DNS servers. The DNS servers are
passed to the DHCP clients along with the IP address and the
subnet mask.
Remote DHCP Server If Relay is selected in the DHCP field above then enter the IP
address of the actual remote DHCP server here.
Follow the instructions in the following table to configure TCP/IP parameters for the Ethernet
port.
Table 17-2 TCP/IP Ethernet Setup
FIELD DESCRIPTION EXAMPLE
TCP/IP Setup
IP Address Enter the (LAN) IP address of your Prestige in dotted decimal notation 192.168.1.1
IP Subnet Mask Your Prestige will automatically calculate the subnet mask based on
the IP address that you assign. Unless you are implementing
subnetting, use the subnet mask computed by the Prestige. 255.255.255.0
RIP Direction Press [SPACE BAR] to select the RIP direction. Choices are Both , In
Only , Out Only or None .
Both
(default)
Version Press [SPACE BAR] to select the RIP version. Choices are RIP-1 ,
RIP-2B or RIP-2M .
RIP-2B
(default)
Multicast IGMP (Internet Group Multicast Protocol) is a network-layer protocol
used to establish membership in a Multicast group. The Prestige
supports both IGMP version 1 (
IGMP-v1 ) and version 2 ( IGMP-v2 ).
Press the [SPACE BAR] to enable IP Multicasting or select None to
disable it.
IGMP-v2
(default)
IP Policies Create policies using SMT menu 25 (see the IP Policy Routing
chapter ) and apply them on the Prestige LAN interface here. You can
apply up to four IP Policy sets (from twelve) by entering their numbers
separated by commas.
2,4,7,9
Edit IP Alias The Prestige supports three logical LAN interfaces via its single
physical Ethernet interface with the Prestige itself as the gateway for
each LAN network. Press [SPACE BAR] to change
No to Yes and
press [ENTER] to display menu 3.2.1.
No
(default)