ZyXEL Communications Prestige 861H-G1, User Manual

Page: 75 / 275

Prestige 861H User’s Guide
WAN Setup 7-9
Table 7-2 WAN Setup
LABEL DESCRIPTION
Application Select an application that you want to apply to this remote node from the drop-down list
box. The application types are:
Middleware , Video , IGMP , Data , VoIP and Home
Gateway .
The defaults available will depend on which services you subscribe to. For example, you
can subscribe to request video services in which case you can use
Middleware , Video
and IGMP for remote node applications.
Select Middleware to have the remote node connect to a device through another
intermediary device, for example, to connect to a set-top box.
Select Video to have the remote node connect to downstream video applications, for
example, IP Video on Demand.
Select IGMP (Internet Group Multicast Protocol) to have the Prestige establish
membership in a Multicast group - it is not used to carry user data. If you assign a
separate pvc to
IGMP rather than using a middleware assigned pvc, you can increase the
speed of this protocol.
If you choose to subscribe to Internet services only from your ISP, you can use the Data
application.
Select Data to have the remote node use computer applications, for example, Internet or
a home wireless LAN.
Select VoIP to have the remote node use real-time applications such as Voice-over-IP.
Select Home Gateway to have the remote node use network devices located in your
home, for example, security surveillance, remote meter reading and domestic appliances
such as fridges or air-conditioners.
Ethernet Port
To assign all Ethernet ports to a service, you
must first disable the remote nodes of the
services you do not want to use. Select
No in the
Active field to do this.
If you select Middleware , VoIP or Home Gateway from the application field, you can
choose which Ethernet port(s) you want assign to an application.
Data applications automatically use the port(s) that you have not selected to use with
Middleware, VoIP or Home Gateway applications. This part of the Web page appears
grayed out.
Video and IGMP use the same ports assigned to use the Middleware application. This
part of the Web page appears grayed out.
Login Information (PPPoA and PPPoE encapsulation only)
Service Name (PPPoE only) Type the name of your PPPoE service here.
User Name Enter the user name exactly as your ISP assigned. If assigned a name in the form
user@domain
where domain identifies a service name, then enter both components
exactly as given.
Password Enter the password associated with the user name above.