ZyXEL Communications Prestige 861H-G1, User Manual

Page: 249 / 275

Prestige 861H User’s Guide
VDSL Commands 33-5
33.3.1 ip ping
Syntax:
ip ping <hostid>
This command pings a remote host. An example is shown next.
Figure 33-1 ip ping
33.3.2 ip route status
Syntax:
ip route status
This command displays the routing table. An example is shown next.
Figure 33-2 ip route status
33.3.3 ip arp status
Syntax:
ip arp status
This command displays all interfaces’ IP Address Resolution Protocol (ARP) status. An
example is shown next.
Figure 33-3 ip arp status
33.4 WAN Commands
These are the commonly used commands that belong to the sys (system) group of commands.
P861H> ip ping 192.168.1.16
Resolving 192.168.1.16... 192.168.1.16
sent rcvd rate rtt avg mdev max min
1 1 100 7 7 0 7 7
2 2 100 4 7 1 7 4
3 3 100 4 7 2 7 4
P861H>
P861H> ip route status
Dest FF Len Device Gateway Metric stat Timer Use
192.168.1.0 00 24 enet0 192.168.1.1 1 041b 0 3
172.16.0.0 00 16 swp00 192.168.1.2 2 801b 0 0
127.0.0.0 00 8 swp00 127.0.0.1 1 041b 0 0
P861H>
P861H> ip arp status
received 0 badtype 0 bogus addr 0 reqst in 0 replies 0 reqst out 1
cache hit 2 (40%), cache miss 3 (60%)
IP-addr Type Time Addr stat iface
192.168.1.255 10 Mb Ethernet 0 ff:ff:ff:ff:ff:ff 43 NULL
num of arp entries= 1
P861H>