ZyXEL Communications Prestige 861H-G1, User Manual

Page: 50 / 275

Prestige 861H User’s Guide
4-10 Wizard Setup
If you want to change your Prestige LAN settings, click Change LAN Configuration to display the
screen as shown next.
Figure 4-7 Wizard Setup : Routing : LAN Configuration
The following table describes the fields in this screen.
Table 4-6 Wizard Setup : Routing : LAN Configuration
LABEL DESCRIPTION
LAN IP Address Enter the IP address of your Prestige in dotted decimal notation, for example,
192.168.1.1 (factory default).
If you changed the Prestige's LAN IP
address, you must use the new IP address if
you want to access the web configurator
again.
LAN Subnet Mask Enter a subnet mask in dotted decimal notation.
DHCP
DHCP Server From the DHCP Server drop-down list box, select On to allow your Prestige to assign
IP addresses, an IP default gateway and DNS servers to computer systems that
support the DHCP client. Select
Off to disable DHCP server.
When DHCP server is used, set the following items:
Client IP Pool Starting
Address This field specifies the first of the contiguous addresses in the IP address pool.
Size of Client IP Pool This field specifies the size or count of the IP address pool.
Primary DNS Server Enter the IP addresses of the DNS servers. The DNS servers are passed to the
DHCP clients along with the IP address and the subnet mask.