ZyXEL Communications Prestige 861H-G1, User Manual

Page: 242 / 275

Prestige 861H User’s Guide
32-4
System Commands
Table 32-1 sys Command Summary
MODULE COMMAND SUB-
COMMAND
ARGUMENTS DESCRIPTION
switch [on|off] Turns the watchdog firmware
protection feature on or off.
cnt [value] Sets (0-34463) or displays the
current watchdog count (in 1.6 sec
units).
dreset Resets node and mask.
romreset Restores the factory default
configuration file.
atsh
xmodemmode [crc|checksum] Displays the mode that Xmodem
uses.
socket Displays the system socket’s ID #,
type, control block address (PCB), IP
address and port number of peer
device connected to the socket
(Remote Socket) and task control
block (Owner).
filter
netbios
disp Displays the current NetBIOS filter
modes.
config <0:LAN to
WAN, 1:WAN to
LAN, 6:IPSec
pass
through><on|off>
Sets NetBIOS filters.
ddns
debug Turns on/off the displaying of DDNS
debug messages.
display Displays DDNS information.
restart Restarts DDNS.
logout This command has no effect.