ZyXEL Communications Prestige 861H-G1, User Manual

Page: 207 / 275

Prestige 861H User’s Guide
Firmware and Configuration File Maintenance 26-5
Table 26-3 General Commands for GUI-based TFTP Clients
COMMAND DESCRIPTION
Send/Fetch Use “Send” to upload the file to the Prestige and “Fetch” to back up the file on your
computer.
Local File Enter the path and name of the firmware file (*.bin extension) or configuration file (*.rom
extension) on your computer.
Remote File This is the filename on the Prestige. The filename for the firmware is “ras” and for the
configuration file, is “rom-0”.
Binary Transfer the file in binary mode.
Abort Stop transfer of the file.
Refer to section 26.2.5 to read about configurations that disallow TFTP and FTP over WAN.
26.3 Restore Configuration
This section shows you how to restore a previously saved configuration. Note that this function
erases the current configuration before restoring a previous back up configuration; please do not
attempt to restore unless you have a backup configuration file stored on disk.
FTP is the preferred method for restoring your current computer configuration to your Prestige
since FTP is faster. Please note that you must wait for the system to automatically restart after
the file transfer is complete.
WARNING!
Do not interrupt the file transfer process as this may
PERMANENTLY DAMAGE YOUR Prestige.
26.3.1 Restore Using FTP
For details about backup using (T)FTP please refer to earlier sections on FTP and TFTP file
upload in this chapter.