ZyXEL Communications Prestige 861H-G1, User Manual

Page: 245 / 275

Prestige 861H User’s Guide
VDSL Commands 33-1
Chapter 33
Ethernet, IP and WAN Commands
This chapter shows you information about the LAN and WAN interfaces and IP address
details and gives a summary of commands available.
33.1 Ethernet Commands
The following chart lists and describes the
ether
commands. Each of these commands must be
preceded by
ether
when you use them. For example, type
ether config
to display
information on the LAN configuration.
Table 33-1 ether Command Summary
MODULE COMMAND SUB-COMMAND ARGUMENTS DESCRIPTION
ether
version Displays the Ethernet device type.
config Displays information about the
configuration block.
cnt
disp <name>
Displays the Ethernet driver
counters.
ioctl <ch_name>
<command>
[arguments]
This command cannot be used
currently.
driver
status <ch_name> Shows the LAN status.
33.2 IP Commands
The following chart lists and describes the
ip
commands. Each of these commands must be
preceded by
ip
when you use them. For example, type
ip address
to display information on
the host IP address. See
These are the commonly used commands that belong to the ip group of commands.
Table 33-2 IP Command Summary
MODULE COMMAND SUB-
COMMAND
ARGUMENTS DESCRIPTION
ip
address [addr] Displays the host IP address.
alias <iface> Sets an alias for the specified
interface.
aliasdis <0|1> Disables/enables the alias for the
specified interface.
arp