ZyXEL Communications Prestige 861H-G1, User Manual

Page: 224 / 275

Prestige 861H User’s Guide
29-2 IP Policy Routing
Menu 25 - IP Routing Policy Setup
Policy Policy
Set # Name Set # Name
------ ----------------- ------ -----------------
1 _______________ 7 _______________
2 _______________ 8 _______________
3 _______________ 9 _______________
4 _______________ 10 _______________
5 _______________ 11 _______________
6 _______________ 12 _______________
Enter Policy Set Number to Configure= 0
Edit Name= N/A
Press ENTER to Confirm or ESC to Cancel:
Figure 29-1 Menu 25 IP Routing Policy Setup
To setup a routing policy, perform the following procedures:
1.
Type 25 in the main menu to open Menu 25 – IP Routing Policy Setup .
2.
Type the index of the policy set you want to configure to open Menu 25.1 – IP Routing
Policy Setup .
Menu 25.1 shows the summary of a policy set, including the criteria and the action of a single
policy, and whether a policy is active or not. Each policy contains two lines. The former part is
the criteria of the incoming packet and the latter is the action. Between these two parts, separator
“|” means the action is taken on criteria matched and separator “=” means the action is taken on
criteria not matched.