ZyXEL Communications Prestige 861H-G1, User Manual

Page: 167 / 275

Prestige 861H User’s Guide
Network Address Translation (NAT) 22-7
Table 22-4 Menu 15.1.1.1 Editing/Configuring an Individual Rule in a Set
FIELD DESCRIPTION EXAMPLE
Global IP
Start This is the starting inside global IP address (IGA). If you have a dynamic
IP, enter 0.0.0.0 as the
Global IP Start . Note that Global IP Start can be
set to 0.0.0.0 only if the types are Many-to-One or Server .
0.0.0.0
End This is the ending inside global IP address (IGA). This field is N/A for
One-to-One , Many-to-One and Server types .
N/A
Server
Mapping Set Only available when Type is set to Server . Type a number from 1 to 10
to choose a server set from menu 15.2.
When you have completed this menu, press [ENTER] at the prompt “Press ENTER to confirm or ESC to
cancel” to save your configuration or press [ESC] to cancel and go back to the previous screen.
22.4 Configuring a Server behind NAT
Follow these steps to configure a server behind NAT:
1. Enter 15 in the main menu to go to
Menu 15 - NAT Setup .
2. Enter 2 to display Menu 15.2 - NAT Server Sets as shown next.
Figure 22-8 Menu 15.2 NAT Server Setup
3. Enter 1 to go to Menu 15.2.1 NAT Server Setup as follows.
Menu 15.2 - NAT Server Sets
1. Server Set 1 (Used for SUA Only)
2. Server Set 2
3. Server Set 3
4. Server Set 4
5. Server Set 5
6. Server Set 6
7. Server Set 7
8. Server Set 8
9. Server Set 9
10. Server Set 10
Enter Set Number to Edit: