ZyXEL Communications Prestige 652H series, User Manual

Page: 452 / 583

Prestige 652H/HW Series User’s Guide
40-2 Remote Management
Enter 11, from menu 24, to display Menu 24.11 — Remote Management Control (shown next).
Figure 40-1 Menu 24.11 Remote Management Control
The following table describes the fields in this menu.
Table 40-1 Menu 24.11 Remote Management Control
FIELD DESCRIPTION EXAMPLE
Telnet Server
FTP Server
Web Server
SNMP Service Each of these read-only labels denotes a service or protocol.
Port This field shows the port number for the service or protocol. You
may change the port number if needed, but you must use the same
port number to access the Prestige. 23
Access Select the access interface (if any) by pressing the [SPACE BAR].
Choices are:
LAN only , WAN only , All or Disable . The default is
LAN only .
LAN only
Secured Client IP The default 0.0.0.0 allows any client to use this service or protocol
to access the Prestige. Enter an IP address to restrict access to a
client with a matching IP address. 0.0.0.0
Once you have filled in this menu, press [ENTER] at the message "Press ENTER to Confirm or ESC to
Cancel" to save your configuration, or press [ESC] to cancel.
Menu 24.11 - Remote Management Control
TELNET Server:
Server Port = 23 Server Access = LAN only
Secured Client IP = 0.0.0.0
FTP Server:
Server Port = 21 Server Access = LAN only
Secured Client IP = 0.0.0.0
Web Server:
Server Port = 80 Server Access = LAN only
Secured Client IP = 0.0.0.0
SNMP Service:
Server Port = 161 Server Access = ALL
Secured Client IP = 0.0.0.0
Press ENTER to Confirm or ESC to Cancel: