Chapter 5 Initial Setup Example
GS2220 Series User’s Guide
81
Switch’s power is turned off.
5.1.2 Set Port VID
Use PVID to add a tag to incoming untagged frames received on that port so that the frames are
forwarded to the VLAN group that the tag defines.
In the example network, configure 2 as the port VID on port 1 so that any untagged frames received on
that port get sent to VLAN 2.
Figure 58
Initial Setup Network Example: Port VID
1
Click
Advanced Application
>
VLAN
>
VLAN Configuration
in the navigation panel. Then click the
VLAN
Port Setup
link.
2
Enter 2 in the
PVID
field for port 1 and click
Apply
to save your changes back to the run-time memory.
Settings in the run-time memory are lost when the Switch’s power is turned off.
Summary of Contents for GS2220-10
Page 23: ...23 PART I User s Guide...
Page 49: ...49 PART II Technical Reference...
