Chapter 9 VLAN
GS2220 Series User’s Guide
136
Figure 109
Port VLAN Trunking
9.2.0.3 VLAN Priority
At the time of writing, you can create Static VLANs, Voice VLANs, Vendor ID-based VLANs, Subnet Based
VLANs, Protocol Based VLANs and MAC Based VLANs on the Switch when the VLAN type is set to 802.1Q.
When a packet is received, the Switch processes the VLAN rules in sequence. The sequence (priority) of
the VLANs is:
1
Vendor ID Based VLAN
2
Voice VLAN
3
Subnet Based VLAN
4
Protocol Based VLAN
5
MAC Based VLAN
If the packet matches a VLAN rule that has a higher priority, for example, an entry with weight 250 in the
vendor ID to VLAN mapping table, the Switch assigns the corresponding VLAN ID to the packet and
stops checking the subsequent VLAN rules.
9.2.0.4 Select the VLAN Type
Select a VLAN type in the
Basic Setting
>
Switch Setup
screen.
Figure 110
Basic Setting > Switch Setup > Select VLAN Type
Summary of Contents for GS2220-10
Page 23: ...23 PART I User s Guide...
Page 49: ...49 PART II Technical Reference...
