Chapter 64 Maintenance
GS2220 Series User’s Guide
513
64.4 Reboot System
Reboot System
allows you to restart the Switch without physically turning the power off. It also allows you
to load the
Current Configuration
, a
Custom Default
or the
Factory Default
configuration when you
reboot. Follow the steps below to reboot the Switch.
Click
Maintenance
>
Maintenance
>
Reboot System
to view the screen as shown next.
Figure 388
Maintenance > Maintenance > Reboot System
1
In the
Reboot System
screen, click a configuration
button next to
Reboot System with
to reboot and load
that configuration file. The following screen displays.
If you select
Current Configuration
, make sure to save the Switch
settings as the current configuration in
the
Maintenance
>
Maintenance
>
Save Configuration
screen.
Figure 389
Reboot System: Use the Current Configuration Confirmation
If you select
Factory Default
, the following warning will appear.
Figure 390
Reboot System: Use the Factory Default Confirmation
If you select
Custom Default
, the following warning will appear.
Figure 391
Reboot System: Use the Custom Default Confirmation
2
Click
OK
again and then wait for the Switch to restart. This takes up to 2 minutes. This does not affect the
Switch’s configuration.
Summary of Contents for GS2220-10
Page 23: ...23 PART I User s Guide...
Page 49: ...49 PART II Technical Reference...
