Chapter 28 ARP Inspection
GS2220 Series User’s Guide
284
28.8 IPv6 Snooping Policy Setup
Use this screen to dynamically create an IPv6 source guard binding table using a DHCPv6 snooping
policy. A DHCPv6 snooping policy lets the Switch sniff DHCPv6 packets sent from a DHCPv6 server to a
DHCPv6 client when it is assigning an IPv6 address. When a DHCPv6 client successfully gets a valid IPv6
address, DHCPv6 snooping builds the binding table dynamically. To open this screen, click
Advanced
Application
>
IP Source Guard
>
IPv6 Snooping Policy Setup
.
Note: If you do not select
Protocol
and
Prefix Glean
, then the Switch cannot perform DHCPv6
snooping.
Figure 214
Advanced Application > IP Source Guard > IPv6 Snooping Policy Setup
The following table describes the labels in this screen.
Apply
Click
Apply
to save your changes to the Switch’s run-time memory. The Switch loses these
changes if it is turned off or loses power, so use the
Save
link on the top navigation panel to
save your changes to the non-volatile memory when you are done configuring.
Cancel
Click this to reset the values in this screen to their last-saved values.
Table 135 Advanced Application > IP Source Guard > IPv6 Source Guard Port Setup
LABEL
DESCRIPTION
Table 136 Advanced Application > IP Source Guard > IPv6 Snooping Policy Setup
LABEL
DESCRIPTION
Name
Enter a descriptive name for identification purposes for this IPv6 snooping policy.
Protocol
Select
DHCP
to let the Switch sniff DHCPv6 packets sent from a DHCPv6 server to a DHCPv6
client.
Prefix Glean
Select this to learn the IPv6 prefix and length from DHCPv6 sniffed packets.
Limit Address
Count
This is the number of IPv6 addresses and prefixes learned using the IPv6 snooping policy.
Note: The maximum limit address count is the maximum size of the IPv6 source
guard binding table. See the product data sheet for the latest specifications.
Add
Click this to create the IPv6 source guard policy or to update an existing one.
Cancel
Click this to reset the values above or if not applicable, to clear the fields above.
Clear
Click this to clear the fields above.
Index
This field displays a sequential number for each IPv6 snooping policy.
Name
This field displays the descriptive name for identification purposes for this IPv6 source guard
policy.
Summary of Contents for GS2220-10
Page 23: ...23 PART I User s Guide...
Page 49: ...49 PART II Technical Reference...
