Chapter 1 Getting to Know Your Switch
GS2220 Series User’s Guide
26
1.1.3 Mode Changing
This section describes how to change the Switch’s management mode.
Note: If you change the Switch’s management mode from standalone mode to Nebula-
managed mode, the configuration settings of the Switch will be overwritten with what
you have configured in Nebula.
Note: If you change the Switch’s management mode from Nebula-managed mode to
standalone mode, the Switch will reset to its factory-default settings.
From Standalone to Nebula Cloud Management
To manage your Switch through Nebula, connect the Switch to the Internet, and register it to a site and
organization at the Nebula web portal (https://nebula.zyxel.com).
See the following steps or the Switch Quick Start Guide for how to do device registration.
Go to the NCC to Register the Switch
1
Go to the Nebula web portal in one of three ways.
• Type https://nebula.zyxel.com in a supported web browser. See the Nebula User’s Guide for more
information about supported browsers.
• Click
Visit Nebula
in the Switch’s login page.
• Click the
Nebula
icon in the upper right corner of the Switch’s Web Configurator.
2
Click
Login
in the Nebula web portal. Enter your myZyxel account information. You will be redirected to
another screen where you can sign up for a myZyxel account if you do not have one.
3
Create an organization and a site or select an existing site using the Nebula setup wizard.
4
Register the Switch by entering its MAC address and serial number and assign it to the site. The serial
number and MAC address can be found in the
Status
screen or the device back label on the Switch.
Use the Zyxel Nebula Mobile App to Register the Switch
1
Download and open the Zyxel Nebula Mobile app in your mobile device. Click
Sign Up
to create a
myZyxel account or enter your existing account information to log in.
2
Create an organization and site, or select an existing site using the Zyxel Nebula Mobile app.
3
Select a site and scan the Switch's QR code to add it to the site. You can find the QR code:
• On a label on the Switch or
• On its box or
• In the Web Configurator at
Basic
>
Cloud Management
>
Nebula Switch Registration
.
See
for more information about the
CLOUD
more information about the
Hybrid Mode
field in the
Status
screen to see if the Switch goes into Nebula
cloud management mode successfully.
Summary of Contents for GS2220-10
Page 23: ...23 PART I User s Guide...
Page 49: ...49 PART II Technical Reference...
