Chapter 4 Web Configurator
GS2220 Series User’s Guide
77
8
Change a service port number but forget it.
9
You forgot to log out of the Switch from a computer before logging in again on another computer.
Note: Be careful not to lock yourself and others out of the Switch.
4.8 Reset the Switch
If you lock yourself (and others) from the Switch or forget the administrator password, you will need to
reload the factory-default configuration file or reset the Switch back to the factory defaults.
4.8.1 Restore Button
Press the
RESTORE
button for more than 7 seconds to have the Switch automatically reboot and restore
the factory default file. See
for more information about the LED behavior. See
also
to see how to use the
RESTORE
button to restore the factory default file.
4.8.2 Restore Custom Default
Press the
RESTORE
button for 3 to 7 seconds to have the Switch automatically reboot and restore the last-
saved custom default file. See
for more information about the LED behavior.
4.8.3 Reboot the Switch
Press the
RESET
button to reboot the Switch without turning the power off. See
for
more information about the LED behavior.
4.9 Log Out of the Web Configurator
Click
Logout
in a screen to exit the Web Configurator. You have to log in with your password again after
you log out. This is recommended after you finish a management session for security reasons.
Figure 56
Web Configurator: Logout Screen
4.10 Help
The Web Configurator’s online help has descriptions of individual screens and some supplementary
information.
Summary of Contents for GS2220-10
Page 23: ...23 PART I User s Guide...
Page 49: ...49 PART II Technical Reference...
