Zycoo UC510 User Manaual Download Page 33 | Manualshive

Page: 33 / 84

Zycoo UC510 User Manaual Download Page 33

Copyright © ZYCOO All Rights Reserved

32

/

84

Global SIP Settings

Global SIP Settings is appropriate for advanced administrators. Please contact our technical
support department before modifying anything in this section.

3.3.2 Voicemail

Voicemail is used to convey a caller's recorded audio message to a recipient when the recipient is
not at seat or busy on the phone.
When configuring your email settings, first you need to set the voicemail reference and voice
message information… as below.
Click

【

Advanced

】



【

Voicemail

】



【

General

】

：

Reference

Item

Explanation

MaxGreeting Time(sec)

Maximum recording length for voicemail greetings

Dial "0" for Operator

Select this option to allow callers to dial "0" to transfer out of
voicemail to the Operator.

Message Format

Save the voice message at this format, WAV(16-bit) or Raw GSM.

Maximum Messages

Maximum voicemail messages allowed.

Max Message Time(min)

Maximum Time for each message allowed.

Min Message Time(sec)

MinimumTime for each message. The message will be deleted
automatically if the time is less than the min. message time.

Say Message CallerID

Play the Caller ID of the caller before playing the voice message.

Say Message Duration

Play the message duration before playing the voice message.

Play Envelope

Play the date, time and caller ID for the voicemail message.

«
...
31
32
33
34
35
...
»

Summary of Contents for UC510





















































































Reviews:

No comments