Zünd S3 M-1200, Operating Manual

Page: 80 / 214

Controls and operation
80
• Contact your service partner if you have any problems with the energy supply.
Note:
Risk of damage to the cutter
If an automatic circuit breaker has been triggered, the cause may be an electrical defect in a
consumer.
• The list shows the consumers who are protected by the triggered automatic circuit breaker.
• Never start up a damaged cutter.
• Work on the electrical system should only be carried out by qualified electricians.
Fuse Rated current Consumer
L1 16 A type C Cutter control, compressor, PC
L2 16 A type C Extractor, various options
L3 16 A type C Auxiliary drive, router converter
A Stop work.
B Remove the outer cover of the power box (see
Remove the power box cover (A10, A21)
).
C Push the switch lever upwards when the automatic circuit breaker is triggered.
Option Description
The automatic circuit breaker triggers again Shut down the cutter. Report the defect to your
service partner.
The circuit breaker can be engaged; after
continuing work, the circuit breaker triggers
again
Shut down the cutter. Report the defect to your
service partner.
The automatic circuit breaker can be engaged
and triggers again after continuing to work
—
D Install the power box cover.