Zünd S3 M-1200, Operating Manual

Page: 95 / 214

Controls and operation
95
4.13.6.1 Inserting/replacing the tool
A
Select
1-5-1 Change module/tool
.
B If necessary, select the module/tool change position.
C
Insert the tool and - if electrically or pneumatically driven - connect to the power supply.
D Confirm the selection with OK .
The tool manager opens.
1
Use to switch to the 1-1-1-1 Select tool menu to select the tool used (see Creating a new
tool on page 95 and Selecting a tool already inserted on page 96).
2 Use Init to switch to the menu for manual or automatic initialization. After initialization the
parameters are saved. The tool manager closes and the main menu appears.
3 Confirm the tool selection with OK . The previously used parameters for this tool will continue to
be used.
4.13.6.2 Creating a new tool
The tool is inserted in the module.
A Select 1-1-1-1 Select tool in the menu.
B Select NEW .
C The Create new entry pop-up menu opens.
D Select the Tool type .
All tool types that can be used in the current module are displayed in the popup menu Tool type .
Select the tool from this list and confirm with OK .
E Enter the appropriate number of the tool in the pop-up menu Tool number and confirm with
OK
.