Zünd S3 M-1200, Operating Manual

Page: 45 / 214

Safety
45
3.8 Rules and occupational safety
• Operation of the machine is always subject to local regulations regarding work safety and accident
prevention.
• Make sure that there is adequate lighting during operation.
• Check protective devices every time before starting the machine.
• If a hazardous situation arises, activate an EMERGENCY STOP control device to shut down the
machine.
• You are not permitted to make unauthorised modifications or changes to the machine which might
affect the system's safety. Accessories or spare parts made by other manufacturers may only be
used with the machine with the written approval of the manufacturer.
• Only service technicians authorized by the manufacturer are permitted to install, commission,
maintain and repair the machine.
• Before carrying out any maintenance, repair and modification work:
• Switch off the machine using the main switch and secure it with a padlock.
• Prevent the machine being switched on inadvertently by removing the mains supply cables to
the power box (several mains connections available!).
3.9 Conduct in the event of malfunctions
As a matter of principle, all troubleshooting work or inspections on the machine should only be carried
out when it is switched off.
The following must never be bypassed or rendered ineffective:
• Light barriers on beams
• Monitoring sensors
• Safety and control switches of the machine
If malfunctions cannot be remedied by the operating personnel using simple means, inform the
responsible service center!