Zoomlion ZCC1100, Operator'S Manual, Page: 283 / 291

Operator’s Manual for Crawler Crane
Operator’s Manual for Crawler Crane
Assembly
and
Dism
antling
5-77
Figure 5-69 Wire layout of fixed jib
5.6.3.2 Function check
Put the key into the ignition key switch, and then turn it clockwise to the 1
st
position, the power
is connected, and then check the following:
a) Check the warning light on boom head:
The warning light is solar lamp, which can adjust its light according to environment. Cover
the warning light with a cover with weak transparency to check whether the warning light
glows.
b) Check hoisting limit switch for H1 (if the main boom is fixed with a load hook):
Support and hold the hoisting limit switch weight for H1 to ensure that the switch is
triggered, and then check whether the icon “upper limit switch on H1” on the screen will
flash and the buzzer will sound.
c) Check hoisting limit switch for H2:
Support and hold the hoisting limit switch weight for H2 to ensure that the switch is
triggered, and then check whether the icon “upper limit switch on H2” on the screen will
flash and the buzzer will sound.
d) Check anemometer
Rotate the vane of anemometer to check whether the wind velocity shown on the load
moment limiter screen in the operator’s cab is normal.
A view
To fixed jib cable drum
A view
Anemometer
H2 winch
Fixed jib junction
box
For reference only.
Operators manual should be consulted and adhered to.